Salty lets you know when to add more salt to your water softener, before you run out.
You can view detailed insights on how your water softener is performing by going to the Salty dashboard. more...
Over time, Salty will begin to predict when you will run out of salt, so you never have to guess.
Salty also lets you know if your home's temperature drops too low.
Salty lets you know if your homes temperature drops below 50 degrees, preventing expensive damage from frozen pipes and broken appliances.
You can share your Salty device with a tenant, family member or friend.
You can share your device via SMS, email or with a link. more...
You can easily share your Salty device from the Salty dashboard. You can assign users either viewer or editor permissions, or transfer device ownership to them. As a viewer, users can view device data, such as the percentage of salt remaining in the brine tank. Editors can view device data and change device settings, like its name.
Salty suggests improvements you can do to your water softener to save you money.
You can ask the Salty Alexa or Google Assistant skill how your water softener is doing.
"Talk to Salty Home"
Tap on Salty to check how much salt is left in the brine tank.
Low salt level or temperature
WiFi connection issue
Salty lights up in different colors based on how your water softener is doing. more...
Don't want to get out your phone or pry off the brine tank lid every time you want to check how much salt is in your water softeners brine tank? You can tap on the top of the Salty WiFi Bridge to see how much salt is left in your brine tank. The bottom of the WiFi Bridge will light up green when the tank is more than 50% full, yellow if the salt level or your homes temperature is low, and red if Salty is having trouble connecting to WiFi.
In the box
The WiFi Bridge is the "brains" of the Salty Water Softener Monitor. Connected by a cable to the Probe, the WiFi Bridge contains a temperature sensor for low temperature alerts, and a capacitive touch sensor and pair of LEDs that lets you quickly the salt level in your water softener. It also contains a processor that allows the Salty Water Softener Monitor to connect to the internet.
The Probe contains an ultrasonic distance sensor that measures the amount of salt in your water softener brine tank by using tank dimensions provided during setup. The Probe mounts to the inside of the brine tank using double-sided tape. Like the WiFi Bridge, the Probe fits in the palm of your hand.
In addition to a WiFi Bridge and Probe, your Salty Water Softener Monitor will come with a 3ft USB A to USB C cable and a USB power brick to power it.
Enclosure material: ABS plastic Dimensions: about 1 x 3 x 2 inches Temperature sensor range: -67 °F min, 257 °F max Processor: ESP12S low power 32-bit MCU WiFi: 802.11 b / g / n, 2.4 GHz, supports WPA2 Input power: DC 5V, 2 A max
Enclosure material: ABS plastic Dimensions: about 1 x 3 x 1 inches Ultrasonic sensor range: 1 inch min, 2 yards max
Input power: AC 100-240V ~ 50/60 Hz, 800 W max Output power: DC 5V, 1 A